uCurrent Board (Top View)
Switch to uCurrent Board (Bottom View)
Comparison between final board built by EEVBlog (Left) and PCB made by Seeed Studio (Right)

Overview:

The Image Viewer above displays two Zoomify Images side-by-side for synchronized comparison. A ruler is also available in the toolbar calibrated in millimeters (mm).

This visual platform can be used to verify that a newly manufactured board (shown on right) is of good enough quality, and to see where parts should be placed during assembly.

Some Usage Notes:

• Use the magnify control in tool bar or use the mouse wheel while pointer is within the view port.
• Use mouse to drag on image or on image map to explore locations of interest.
• Use ruler icon to measure distances, perimeters or areas. To measure distance left-click mouse on initial postion then right-click mouse on final postion.
• Maximum zoom presented here is 10x.

Image preparation:

Images created using Canon 5D Mark II body, Canon EF 70-200mm f/2.8L IS II USM AutoFocus Telephoto Zoom Lens, Canon 77mm Close-Up Lens 500 D, and AmScope HL250-BY 150W Fiber Optic Dual Gooseneck Illuminator.

References:

• Where to order a fully functional uCrrent board built by EEVBlog
• Landing page for uCrrent open source project including Gerber files www.eevblog.com/projects/ucurrent/
• Where to order a bare PCB using Gerber files from Seeed Studio